UTG PRO 34MM HIGH PROFILE PICATINNY RINGS, RWU013420

UTG PRO 34MM HIGH PROFILE PICATINNY RINGS, RWU013420

SKU:
UTG-RWU013420
$49.97
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description
  • Proudly Designed and Made in USA
  • High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 34mm Tube, and up to a 73mm Outer Objective
  • The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
    a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
    b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
    c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
  • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
  • Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
  • Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
  • UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
  • EU PAT. EP2761064-0001,US PAT. D771218

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

 

MADE IN USA Yes
SADDLE HEIGHT (IN) 0.79
SADDLE HEIGHT (MM) 20
WARRANTY Lifetime
NO. OF PIECES 2
MATERIALS Aluminum/Steel
COLOR(S) Black
QUICK-DETACHABLE No
PARTS INCLUDED T25 Torx Wrench
MOUNT TYPE Picatinny
HEIGHT PROFILE High
CALIBER RATING .50 BMG
OPTIC TO MOUNT TORQUE VALUE (IN-LB) 25
MOUNT TO RAIL TORQUE VALUE (IN-LB) 45
SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) 73 mm

 

CENTER HEIGHT (MM) 37
INNER DIAMETER (MM/IN) 34 mm
INNER DIAMETER (MM/IN) 34 mm
RING WIDTH (MM) 22
SADDLE HEIGHT (IN) 0.79
SADDLE HEIGHT (MM)

20

LEAPERS LIFETIME WARRANTY

Leapers, Inc. warrants that all products conform to published specifications and are free from defects in material and workmanship. Leapers, Inc. will repair or replace, at our discretion, a defective product for the duration of the product’s lifespan. Verification through an RA number is required. In the event of a product being discontinued, credit in the amount of the product’s MSRP may be offered.