UTG PRO P.O.I 1" HIGH PROFILE DOVETAIL RINGS, RDU012520
UTG
$49.97
(No reviews yet)
Write a Review
UTG
UTG PRO P.O.I 1" HIGH PROFILE DOVETAIL RINGS, RDU012520
- Proudly Designed and Made in USA
- High Profile Precision Optics Interface (P.O.I®) Scope Rings Have a 33mm Center Height to Fit 1" Tube Optics with up to a 65mm Outer Objective Diameter
- The innovative Precision Optics Interface (P.O.I®) Addresses 3 of the Most Critical Areas in Scope Rings -
a) Progressively Machined and Precise Inner Diameter to Achieve a Seamless Interface Between the Scope Ring and Tube
b) Torx Screw Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Precisely Clenches Dovetail Rail for a Secure and Repeatable Zero Hold
c) Removable Threaded Recoil Stop-pin Provides an Additional Interface Point with the Dovetail Rail for Added Security Against Bidirectional Recoil - Original Snag-free Contoured Profile with Reduced Weight and Size
- 6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws, Mounts onto Most Dovetail Rails
- EU PAT. EP2761064-0001, US PAT. D771218
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.
ACCESSORIES INCLUDED
- T25 Torx Wrench
| MADE IN USA | Yes |
|---|---|
| SADDLE HEIGHT (IN) | 0.79 |
| SADDLE HEIGHT (MM) | 20 |
| WARRANTY | Lifetime |
| NO. OF PIECES | 2 |
| MATERIALS | Aluminum |
| COLOR(S) | Black |
| QUICK-DETACHABLE | No |
| PARTS INCLUDED | T25 Torx Wrench |
| MOUNT TYPE | Dovetail |
| HEIGHT PROFILE | High |
| CALIBER RATING | .50 BMG |
| OPTIC TO MOUNT TORQUE VALUE (IN-LB) | 25 |
| MOUNT TO RAIL TORQUE VALUE (IN-LB) | 45 |
| SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) | 65 |
| WEIGHT (OZ) | 2.8 / 5.6 |
| CENTER HEIGHT (MM) | 33 |
|---|---|
| INNER DIAMETER (MM/IN) | 1 in |
| INNER DIAMETER (MM/IN) | 1 in |
| RING WIDTH (MM) | 22 |
| SADDLE HEIGHT (IN) | 0.79 |
| SADDLE HEIGHT (MM) | 20 |
LEAPERS LIFETIME WARRANTY
Leapers, Inc. warrants that all products conform to published specifications and are free from defects in material and workmanship. Leapers, Inc. will repair or replace, at our discretion, a defective product for the duration of the product’s lifespan. Verification through an RA number is required. In the event of a product being discontinued, credit in the amount of the product’s MSRP may be offered.
