UTG PRO P.O.I 1" LOW PROFILE PICATINNY RINGS, RWU012510

UTG PRO P.O.I 1" LOW PROFILE PICATINNY RINGS, RWU012510

SKU:
UTG-RWU012510
$49.97
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description
  • Proudly Designed and Made in USA
  • Low Profile P.O.I® (Precision Optics Interface) Rings Have a 23mm Center Height to Fit Optics with a 1" Tube, and up to a 45mm Outer Objective
  • The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings:
    1. Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
    2. Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
    3. Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
  • 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width
  • Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
  • Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
  • EU PAT. EP2761064-0001, US PAT. D771218

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

ACCESSORIES INCLUDED

  • T25 Torx Wrench
MADE IN USA Yes
SADDLE HEIGHT (IN) 0.39
SADDLE HEIGHT (MM) 10
WARRANTY Lifetime
NO. OF PIECES 2
MATERIALS Aluminum/Steel
COLOR(S) Black
QUICK-DETACHABLE No
PARTS INCLUDED T25 Torx Wrench
MOUNT TYPE Picatinny
HEIGHT PROFILE Low
CALIBER RATING .50 BMG
OPTIC TO MOUNT TORQUE VALUE (IN-LB) 25
MOUNT TO RAIL TORQUE VALUE (IN-LB) 40
SCOPE OUTER OBJECTIVE DIA (MAX) (MM/IN) 45 mm

 

CENTER HEIGHT (MM) 23
INNER DIAMETER (MM/IN) 1 in
INNER DIAMETER (MM/IN) 1 in
SADDLE HEIGHT (IN) 0.39
SADDLE HEIGHT (MM) 10
WIDTH (MM) 22

LEAPERS LIFETIME WARRANTY

Leapers, Inc. warrants that all products conform to published specifications and are free from defects in material and workmanship. Leapers, Inc. will repair or replace, at our discretion, a defective product for the duration of the product’s lifespan. Verification through an RA number is required. In the event of a product being discontinued, credit in the amount of the product’s MSRP may be offered.