UTG® ACCU-SYNC® 1" Picatinny Cantilever Mount, 50 mm Offset, High Profile, Red SKU AIR12250AR
UTG
$49.97
(No reviews yet)
Write a Review
UTG
UTG® ACCU-SYNC® 1" Picatinny Cantilever Mount, 50 mm Offset, High Profile, Red SKU AIR12250AR
- UTG ACCU-SYNC® 1" High Profile 50mm Offset Scope Ring Mount for a Precise Fit on MIL-STD-1913 Picatinny Rails
- Precision CNC Machined from Aircraft Grade Aluminum and Finished in a Red Anodize
- Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability
- Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
- Single Mount Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops For a Secure Zero Hold
- 22mm Saddle Height, 50mm Offset Distance, 100mm Base Length, High Profile Fits 1" Tube Optics with up to a 69mm Outer Objective Diameter
- Includes a T20 Torx Wrench for Simple and User Friendly Installation
- NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 35 inch-lb.
| Color(s) | Red |
|---|---|
| Height Profile | High |
| Materials | 6061-T6 Aluminum |
| Mount Type | Picatinny |
| Quick-detachable | No |
| Surface Finish | Anodized |
| Torque Value (Mount to Rail) | 35 in-lbs |
| Torque Value (Optic to Mount) | 25 in-lbs |
| Weight | 150 g / 5.3 oz |
| Base Length | 100 mm / 3.94 in |
|---|---|
| Center Height | 35 mm / 1.38 in |
| Inner Diameter | 1 in |
| Max Fit Obj. Bell Dia | 69 mm / 2.72 in |
| Offset Distance | 50 mm / 1.97 in |
| Ring Distance (Inner) | 60 mm / 2.36 in |
| Ring Width | 25 mm / 0.98 in |
| Saddle Height | 0.87 in |
| Saddle Height | 22 mm / 0.87 in |
LEAPERS® LIFETIME WARRANTY
Leapers, Inc. warrants that all products conform to published specifications and are free from defects in material and workmanship. Leapers, Inc. will repair or replace, at our discretion, a defective product for the duration of the product’s lifespan. In the event of a product being discontinued, credit for the product’s MSRP may be offered.
